Appliance Holder STEGOFIX PLUS
SFP 095

  • Alternative to 35 mm DIN rail
  • Easy/flexible installation
  • For devices and sockets with DIN rail mounting clip
  • Screw mounting
  • Self-adhesive tape mounting
  • Magnet mounting

The appliance holder STEGOFIX PLUS is the flexible alternative to a 35 mm DIN rail. It allows for a quick and easy installation of small devices or accessory equipment intended for DIN rail mounting. STEGOFIX PLUS is suitable for devices with a clip width of max. 66 mm, offering a convenient mounting method for almost any application: screw mounting with 25 mm pitch, high-performance adhesive tape or rubberized neodymium magnets.

Areas of applicationdevices with DIN rail mounting clip suitable for a 35 mm DIN rail
according to EN 60715, max. clip width 66 mm
Mounting
 > Screw mounting



 > Self-adhesive tape mounting

 > Magnet mounting


e.g. tapping screws DIN 7981 (ISO 7049), Ø 5.5 mm;
thread-forming screws DIN 7500, M5;
(not included in delivery)

adhesive surface 65 x 25 mm

2 neodymium magnets, rubberized

Materialplastic according to UL94 V-0, black
Dimensions71 x 40 x 15 mm
Operating temperature-35 to +75 °C (-31 to +167 °F)
Storage conditions (self-adhesive tape)optimal storage conditions for self-adhesive tape
approx. +20 °C (+68 °F) at 50 % RH
ApprovalsEAC
NoteMaterial adheres to limit values in accordance with RoHS3
Art. No.ModelMax. Holding force11 packing unitWeight (approx.)
09550.0-05Screw mounting    -5 pieces65 g (13 g/pc.)
09550.1-05Self-adhesive tape mounting75 N5 pieces70 g (14 g/pc.)
09550.2-05Magnet mounting30 N5 pieces145 g (29 g/pc.)

1 At room temperature. Depending on the conditions of use (e.g. surface condition, size of device to be mounted, etc.) the actual holding force may differ from the values specified in the table above.

Self-adhesive tape mounting
Magnet mounting

Application example

Technical Drawing

STEGOFIX PLUS SFP 095