Electronic Thermostat
ETR 011

  • Large setting range
  • Small hysteresis
  • Status indicator (LED)
  • Change-over contact
  • Clip fixing

The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both, inductive and resistive loads, via relay with change-over contact. The LED integrated in the adjustment knob is lit when the NC is closed. (e.g. when a connected heater is operating).

Switch temperature difference4K (± 1K tolerance) at +20°C (+68°F)
Sensor elementNTC
Reaction timeapprox. 5 sec.
Contact typechange-over contact (relay)
Service life> 50,000 cycles
Max. switching capacity (relay output)240VAC / 120VAC, 8 (1.6) A
DC 100W at 24VDC
Max. inrush currentAC 16A for 10 sec.
Optical indicatorLED
Connection5-pole terminal, clamping torque 0.5Nm max.:
rigid/stranded1 wire 2.5mm² (AWG 14)
Mountingclip for 35mm DIN rail, EN 60715
Casingplastic according to UL 94V-0, light grey
Dimensions64.5 x 42 x 38mm
Weightapprox. 70g
Fitting positionvertical
Operating/Storage temperature-40 to +85°C (-40 to +185°F)
Operating/Storage humiditymax. 90% RH (non-condensing)
Protection typeIP20

To top

¹ When connecting with stranded wires, wire end ferrules must be used.

Art. No.Operating voltageSetting range               Approvals
01131.0-00230VAC, 50/60Hz-20 to +60°CVDEUL File No. E164102EAC
01131.9-00120VAC, 50/60Hz-4 to +140°F-UL File No. E164102EAC

To top

Technical drawing

Electronic Thermostat ETR 011

To top