Self-adhesive Appliance Holder STEGOFIX
SF 095

  • Direct fixing of small appliances and
    35mm DIN rails
  • Simple to mount
  • Self-adhesive

With STEGOFIX small appliances can be mounted in enclosures significantly quicker, easier and more economically than before, without drilling holes. Mounting DIN rails is a simple matter with STEGOFIX. Longer rails are mounted on several STEGOFIX units and joining two rails is also not a problem. Subsequent changes and the mounting of additional appliances can be carried out with ease – even in confined spaces. STEGOFIX is a self-adhesive plastic unit with an adhesion power which will bear a continuous load of 500g. The high-performance industrial adhesive band is also non-ageing and designed with safety tolerances.

Technical Data

Download PDF

Load500g after a 24h waiting period¹
Mountingself-adhesive (non-ageing, high-performance adhesive band)
Materialplastic according to UL94 V-0
Dimensions43 x 38 x 14mm
Screw pitch12.8mm, Ø 3.6mm; for perforated 35mm DIN rails
Operating/Storage temperature-45 to +70°C (-49 to +158°F)
ApprovalsEAC
NoteMaterials adhere to limit values in accordance with RoHS3

¹ depending on the conditions of use (e.g. surface condition, size of the device to be mounted, etc.) higher loads were achieved.

To top

Installation
STEGOFIX can only be mounted on smooth surfaces, e.g. metals, lacquered surfaces and plastics (except polyethylene, polypropylene and rubber). The surfaces must be dry, free from dust, oil, separating agents and other contamination.

To top

Note: When using the STEGOFIX as a DIN rail holder, only DIN rails (EN 60715) with perforation 18 x 6.2mm or 18 x 5.2mm can be used.

To top

Art. No.1 packing unitWeight (approx.)
09510.0-015 pieces60g (12g/pc.)

To top